I am designing a 3 Phase input Full bridge SMPS, where the 3 phase bridge rectifier is directly connected to the mains supply (AC voltage 400 V line-line or 230 V...
Hi there, i am looking for a plasma , lcd and led book if any 1 have a book can they please send it to me. i am willing to share my others books with you guys my mail....
HI THERE, IS THERE SOMEONE THAT CAN SEND ME JESTINE YONGS SWITCH MODE POWER SUPPLY REPAIR EBOOK. I WILL ALSO SWAP SOME OF MY OTHER BOOKS PLEASE NEED 1 URGENTLY. MY MAIL ...
Hi Joseph, I'm sure you will like the sound of this amp and it is very powerful, just be sure about the orientation of the transistors and build the protection
Hi Microsim, Hi Kanwar,
Thanks for prompt reply much apreciloved.
I will keep you updated as I go along with it.
I am the designer of that amp and friend of Microsim who owns the rights for this amp.
The opto coupler used should
I used PI Expert to design a flyback supply, 45 volts, 1 amp. When the design finishes, I get a warning to "verify design on bench and ensure BVDSS
8. LV Side
In this section, we will derive the requirements for the low voltage side, starting secondary losses.
1- that opto for clip must be of certain manufacturer , YES, I cannot remember witch manufacturer,
Hi finally got PCB from other member who didnt had time to build this amp.
Now buying components and did read that opto for clip must be of certain
7. HV Side
First, a quick reminder of our design goals, noting a slight modification of the input voltage, Vdc:
4. LC Filter Analysis
Continuing our magnetics section, we shall now consider the design of the low-voltage side low-pass LC filter.
For our purposes, Litz-wire. It is designed to reduce the skin and proximity effects losses associated with conductors, hence making a good choice for
PCB of a 2KW Clas H amp with turn on delay, clip indicator short circuit
price 23US$ ex shipping fully tested
I have a need for a 6kW+ SMPS @ 12v, < 300mv ripple, fully regulated, single rail.
The general direction:
Standard 90 - 260V AC input...