I am trying to design a SMPS for a controller, but not entirely sure where to start. I know that I want the input to be universal from 85Vac to 270Vac. Also PWM seems to play a key role in the...
Thanks for your help, I think I will try one of the drivers you mentioned.
Keep a house warm with that 20 kw smps? I do not think so, because then it has a lot of loss.
Oke I have done
Thank you very much for those links.
American power can only help with an alternator with the desired output and
Thank you sir. But what about the freq difference at high and low output of ir2110?
It's easy for me to say scrap it and start again but I understand if you want to try to get it working as a half bridge. Half bridge is not a very nice
Waves looks nice at the mosfets outputs
You can go a head with the 220VAC with the Precautions mentioned
The UCC38083 through UCC38086 is a super simple current-mode push-pull controller. It's an 8-pin DIP, SOIC, or TSSOP package. The differences in the four
Hope these can help.
did some settings now and here is the output of mosfets