PDA

View Full Version : Mosfet amp 20 to 500 watt from 20VDC to 80VDC



meanman64
11-05-2011, 02:08 PM
Boards will be with 105Ám copper.For details look at the mosfet section

meanman64
11-05-2011, 02:10 PM
Board layout

meanman64
12-12-2011, 02:57 PM
People can sign in
https://docs.google.com/spreadsheet/ccc?key=0AvCRDh-vaRm7dDF6eHdLeEpYZFVsZGU4SHRWeVRuVVE&hl=nl#gid=0

meanman64
12-16-2011, 10:03 AM
Lira, where are you??????

MicrosiM
12-20-2011, 08:12 PM
I am in for 2 PCBc

meanman64
12-20-2011, 11:44 PM
I am in for 2 PCBc

You can fill in your name at the google spreadsheet

meanman64
12-21-2011, 06:09 AM
Nine boards so far

Lira
12-22-2011, 11:40 AM
Sorry for the late answer, i was traveling on business...

Thanks Meanman

evette
06-19-2012, 02:01 PM
Can you put me down for 10 boards. Thanks Evette

meanman64
06-19-2012, 04:04 PM
Hi Joe,
What are planning to do?Please fill in your name at the spreadsheet
https://docs.google.com/spreadsheet/ccc?key=0AvCRDh-vaRm7dDF6eHdLeEpYZFVsZGU4SHRWeVRuVVE&hl=nl#gid=0

evette
06-20-2012, 02:54 PM
Hi, Mr. meanmam, I,m still in the hospital, I don,t want to miss out on these boards. I,m only allowed 1 hour a day on my little evettes computer. Could you please Email me the bom and schematic in pdf form. Thanks. Joe

meanman64
06-20-2012, 03:21 PM
Hi, Mr. meanmam, I,m still in the hospital, I don,t want to miss out on these boards. I,m only allowed 1 hour a day on my little evettes computer. Could you please Email me the bom and schematic in pdf form. Thanks. Joe

Hi Joe,
I will try to make a pdf file of the schematic.Maybe I draw a new one in Eagle or Sprint layout and to be shure give me your addres and I'll send you a copy of the scan I've made.Do you know this amp,what brand it is?
I wish you a speedy recovery,God Bless you and sending positive vibes to you.
Kind regards
Patrick

darezk804
06-22-2012, 10:46 AM
Hello,
What is the approximate cost of PCBs? I know that if more pcbs that cost will be lower but i don't know that i will be have eanught money for this pcb when i'm considering the euro or dolars conversion rate for my currency
Regards

meanman64
06-22-2012, 12:09 PM
The current price is 18 Euro/board but it will go down.

meanman64
03-01-2014, 11:15 AM
I's been a while but in a short while I'll start the groupsbuy.I check everything again and if all is OK the groupsbuy is a fact.The Gerber files has been approved by the etching company.