PDA

View Full Version : do you listen any active crossover ever ?



erhan739
06-11-2010, 12:27 AM
hello ; do you listened any active sound crossover ever ? if you want it, please post it in this headline. i will share so many option about it :D

metal
06-12-2010, 12:37 AM
tell me more.

erhan739
06-12-2010, 12:48 AM
you can see this

metal
06-12-2010, 12:58 AM
schematic?

erhan739
06-12-2010, 01:05 AM
this is a schematic. did'n fit in 1 threads sorry

irvynejay
12-09-2010, 07:44 AM
hello erham do you have active cross over for bi ampping power amps i want to diy for it

erhan739
12-10-2010, 12:45 PM
hello irvynejay; What's it like do you want about ? bi amping for which band (hi; mid; hi/mid; low or sub ?

irvynejay
12-10-2010, 01:29 PM
i mean active crossover with hi, mid, low and sub out and full range out in one circuit that i will use on 2x3 power amps

erhan739
12-10-2010, 02:01 PM
okay, understand you. ı'll post something for you ı hope useful for you.

erhan739
12-10-2010, 02:07 PM
it is at attachment to usable all files on pdf if you want, ı'll send on .lyt or if you have trouble, ı'll contact to you always.

irvynejay
12-10-2010, 10:30 PM
it is at attachment to usable all files on pdf if you want, ı'll send on .lyt or if you have trouble, ı'll contact to you always.

many thanx erham

erhan739
12-11-2010, 11:04 AM
you should say results to me

khalsa
12-17-2010, 06:10 PM
hi erhan thanks can you send the circuit daigram of 4way active crossover i am build early

erhan739
12-18-2010, 10:39 AM
hi erhan thanks can you send the circuit daigram of 4way active crossover i am build early
all files in the attachment. no more

irvynejay
12-25-2010, 11:51 AM
almost done erhans cross over

erhan739
01-09-2011, 05:59 PM
it looks like a monster say results as soon as possiable

ravpreet420
02-17-2011, 06:15 AM
Your crossover circuit is great, it contain all things if you have a transistor or ic tone control circuit plz send

erhan739
02-17-2011, 07:45 AM
Your crossover circuit is great, it contain all things if you have a transistor or ic tone control circuit plz send
what about a tone controller mic in/line in master in preamplified in how many Db/oct which bands you must say me ı have so many circuits.

ravpreet420
02-19-2011, 03:55 AM
Your Best Circuit for Line in(with tone control,low high mid ) with bridge circuit

erhan739
02-19-2011, 01:37 PM
Your Best Circuit for Line in(with tone control,low high mid ) with bridge circuit
you can check it; http://www.diysmps.com/forums/showthread.php?55-STEREO-3band-eq.-LİNE-or-MİC-İNPUTABLE-PREAMP

ravpreet420
02-28-2011, 07:34 AM
I m build ur circuit ,great frequencies ,sub frequencies are great thanx

erhan739
02-28-2011, 09:52 PM
I m build ur circuit ,great frequencies ,sub frequencies are great thanx

Thanks for your good commets. Follow us!

ravpreet420
04-12-2011, 01:52 PM
If you have any other crossover circuit plz upload on forum ,
great forum, great response
great engneering
Thanx & Regard

ravpreet420
04-12-2011, 01:52 PM
If you have any other crossover circuit plz upload on forum ,
great forum, great response
great engineering
Thanx & Regard

erhan739
04-13-2011, 11:00 PM
dear ravpreet420 What features do you want on crossovers ?

ravpreet420
04-16-2011, 03:49 AM
technical specification:-
24db oct frequency :- 20khz to 20hz
sub :- 50hz to 250hz -24/10db
low-mid :- 70 to 1khz -24/10db 480 to 7khz -24/10db

erhan739
04-16-2011, 07:56 PM
ı don't use up to 24db/oct crossovers... in my opinion they are very strong and dangerius... phase problems...

ravpreet420
04-17-2011, 07:11 AM
if u have any other better clear crystal sound crossover(professinal) circuit plz upload
Thanx & Regard

erhan739
04-17-2011, 08:10 AM
Where are you going to use this filter? Okay if i get better i'll upload here

ravpreet420
04-18-2011, 03:00 AM
Use for 1000w per channel amp with sub

cled
12-22-2012, 10:44 AM
@erhan739...this is very helpful in my audio project,thank you very much for sharing this circuit.