Most Popular Blogs

  1. Problem with IR2153 SMPS

    Quote Originally Posted by dinithm View Post
    Click image for larger version. 

Name:	failed.jpg 
Views:	17149 
Size:	78.8 KB 
ID:	3345
    first time turn on - it work fine voltage ok 14.7v, load 4.7ohms
    after 30sec - turned it off ,no heat no problem

    second time turn on - (load 4.7ohms)
    PCB burned AND fused,
    2 fet (irf840) burned


    three times rebuilt it same result,one time fets exploded

    Click image for larger version. 

Name:	Screen shot 2013-01-07 at 2.39.33 PM.jpg 
Views:	3946 
Size:	21.7 KB 
ID:	3348
    Click image for larger version. 

Name:	1.jpg 
Views:	3070 
Size:	64.5 KB 
ID:	3346
    Click image for larger version. 

Name:	2.jpg 
Views:	1609 
Size:	78.6 KB 
ID:	3347
    ...
    Categories
    Uncategorized
  2. Current transformer calculation

    To determine how to calculate the number of turns according to the current handling for a SMPS.

    1) Determine the voltage needed for sensing and add 1 diode forward voltage in a centre tapped configuration, or 2 diode
    forward voltage drop for a single secondary winding with a bridge rectifier.

    2) Calculate the peak current for the SMPS in the primary winding.
    3) Determine the turns ratio for the current transformer. Please note that the ...
    Categories
    Uncategorized