Dx Blame MKIII is now MKIII Hx or call it Hx to be simple
Was upgraded and updated and i will publish here, for a while, only schematic...more details published in the www.diyaudio.com in the solid state section.
I am short in time..will put details here in he future.... Alex mm will provide you new boards and new layout in black and white to etch.
This amplifier cannot operate in 1 ohm anymore, had special sonics, awsome clarity, low distortion, high speed and wonderfull dinamics...can put out more than one kilowatt to each channel but distortion in this case jumped to 10 percent.
Low distortion specification is 200/340 and 500 watts and speaker impedance is 8/4 and 2 ohms while distortion is 0.008 % THD
regards,
Carlos