Nathan Jolly
New member
Hi all, I am looking to build an inverter plasma cutter. So I figured I would start with the aux pwr supply and go from there.
Needs to supply around 200W @ 24Vdc, provide isolation and operate from 300Vdc to 700vdc - PFC output "later project".
Am considering Flyback using TI UCC28600 IC and am curious if anyone has any experience using this IC?
http://focus.ti.com/docs/prod/folders/print/ucc28600.html
Any Feedback/Questions Welcome
Regards
Nathan
Needs to supply around 200W @ 24Vdc, provide isolation and operate from 300Vdc to 700vdc - PFC output "later project".
Am considering Flyback using TI UCC28600 IC and am curious if anyone has any experience using this IC?
http://focus.ti.com/docs/prod/folders/print/ucc28600.html
Any Feedback/Questions Welcome
Regards
Nathan