badboy_6120
Member
OK no problem at all
I will re-learn the eagle because I used it about a few years ago and since then I work with express pcb
I'll make the eagle file
but first I need to run the protection part
because I'm going to bring the protection part in the main pcb (just one pcb for this smps)
tomorrow(I'm very sleepy and here it's 4:15 am) I will test the smps with 1kw load for an hour with large heatsink and if everything goes well, I'll start with protection part
Regards
I think eagle is more popular than this
But whatever you say
please test it and let me know about it
regards